Small screw head turned what to do?

My little brother (16) wanted to clean the Ps4 alone and did this here. What should I do as his big brother?

1. Method with the rubber band is not possible

Try it with a slotted screwdriver. Sometimes you can't touch it

Nope doesn't work either: /

Is it important that she has to get out?

Yes, otherwise I can't get into the ventilation, where it's most important to clean it.

The method with the rubber band goes. You just have to take the right rubber band. And the right one of the rubber band tricks.

But since it is clearly visible that the second screw, which is not yet defective, is also sealed, just leave your fingers away. Is not meant to fiddle around in there.

Your little brother even hammered on it, as bent as the screw head.

There's something in there… Did little brother break off the Phillips screwdriver? The part has to get out and take a suitable one.

Sometimes he is very impatient

If it doesn't work with rubber or paper, slit it with a dremel so that you can use the appropriate screwdriver.

Glue the hex or similar L-shaped piece with special adhesive (previously roughen both surfaces)

if this is of no use, get left-hand extractor or drill out

There's nothing inside, luckily a screwdriver is still in place.