We need more information, something like that can have 100+ causes, how should we know which one that is?
You also do not go to the workshop, say "broken" and go again.
If I press on the head lights the button briefly and then it goes out again and that remains so
I did not mean, how many Hz does your TV have, is the voltage sufficient, is it externally damaged, internal damage? Everything wired correctly?
She is the fan a little dirty well very dirty my 60hz
Everything went a few months ago
Have only HDMI and power cable in
Clean the fan once again and rewire everything and then try it, and sometimes even see if something has slipped inside, even the smallest part can do something. Is the cable missing a pin or clip?
I don't know how do I clean her
Unscrew, take out, clean, insert again and check the interior if anything is broken or slipped, is like when you 'nen PC assembles.
Okay, it may be due to the fan
Because I believe she gets too little power
It may be that they are not connected properly or it's just the dirt, but try a different outlet, maybe the one you use is not enough voltage.
there's a vid
Cleaning is definitely necessary, but I also hear no crack, so it's not at the voltage…
I can't screw it up I do not have the right attachment
But I think it's up to the inside, the only thing I could think of is that if the console is attached to a multi-connector, it could be because of it.
I already had the problem.
I waited 2-3 days then it just worked out again
